128	BELLHOWL Version 1.34
129	Bell & Howell RSC (SCSI)
130	Copyright © Pixel Translations Incorporated. 1991-1994
150	Bell & Howell 2135 with RSC
151	Bell & Howell 2137 with RSC
152	Bell & Howell 2138 with RSC
153	Bell & Howell 3238 with RSC
154	Bell & Howell 3338 with RSC
155	Bell & Howell 6338 with RSC
4700	None
4701	ACE Dither
4702	3338 Dither
4710	Priority 1
4711	Priority 2
4712	Priority 3
4713	Priority 4
4714	Priority 5
4715	Priority 6
4716	Installed ACE (if applicable):
4717	3 Function ACE
4718	5 Function ACE
4720	No bar code
4721	EAN-8
4722	EAN-13
4723	CODE 39
4724	CODE 2/5 interleaved
4725	CODE 2/5 3 lines (matrix)
4726	CODE 2/5 3 lines (datalogic)
4727	CODE 2/5 5 lines (industrial)
4728	Patch Code (type II, III, or T)
4730	Default Paper Size:
4731	Letter - 8.5 x 11 in
4732	Legal - 8.5 x 14 in
4733	Double Letter - 11 x 17 in
4734	A3 - 297 x 429 mm
4735	A4 - 210 x 297 mm
4736	A5 - 148 x 210 mm
4737	B4 - 250 x 353 mm
4738	B5 - 176 x 250 mm
4739	Scanner's Maximum
4744	Please select front or back main scan region to change Bell & Howell special features.
4745	Horizontal search
4746	Vertical search
4747	Vertical first, then horizontal
4748	Horizontal first, then vertical
4750	 with Model 2135
4751	 with Model 2137
4752	 with Model 2137A
4753	 with Model 2138A
4754	 with Model 3238
4755	 with Model 3338
4756	 with Model 3338A
4757	 with Model 6338
4762	Remote SCSI Controller: Scanner not found.
4763	Remote SCSI Controller: Scanner not ready (paper in transport).
4764	Remote SCSI Controller: Unknown scanner attached.
4765	Scanner lamp is bad.
4766	Communication error between Remote SCSI Controller and scanner.
4767	Page detected but lamps are off.
4768	Camera white level problem.
4769	Transport motor failure.
4770	Device or paper sensor(s) bouncing.
4771	Feeder is not attached.
4772	Logic system general failure.
4773	No dual logic communication.
4774	SCSI Parameter list length error.
4775	Invalid SCSI Command code.
4776	Invalid field in SCSI Command Descriptor Block (CDB).
4777	Unsupported Logical Unit Number (LUN).
4778	Invalid field in parameter list.
4779	SCSI Command Sequencing error.
4780	Too many windows defined.
4781	Batch Start error.
4782	Batch Abort error.
4783	Invalid bits in IDENTIFY message.
4784	Reset detected, LUN is becoming ready.
4785	Aborted SCSI command (unspecified error).
4786	No paper detected before time-out (SCAN command timed-out).
4787	SCSI Parity error.
4788	Aborted command due to memory error.
4789	Not enough DOS memory (GlobalDOSAlloc failed).
4790	RSC (Remote SCSI Controller) does not detect scanner. Reset RSC and check cables and power.
4791	Application has chosen unsupported TAG_SCANTYPE value.
4792	Section border error.
4793	No bar code was found.
4794	Icon size if larger than image size.
4800	10 CPI
4801	5 CPI
4802	8 CPI
4803	4 CPI
4810	0 degree
4811	90 degree
4812	180 degree
4813	270 degree
6097	00010092
6098	00000401